5.231~5.250

5.231 飞行里程 Along Track Distance

  5.231 Along Track Distance (ATD)
  Definition/Description: The “Along Track Distance” field used on Flight Planning Arrival/Departure Data Records is the total distance for a given transition, from the initial fix to the ending fix in the transition. A single occurrence of a Flight Planning Arrival/Departure Data record can contain up to three Along Track Distance fields, one for each of the transition types that can make up a single terminal route in the Primary Record and up to four possible intermediate fix points in each Continuation Record. Collectively, the values equal the along track distance from the first fix in the first transition to the last fix in the last transition.
  Source/Content: The along track distances will be calculated by data suppliers using coded terminal procedures or uncoded terminal procedures derived from official government source and expressed in nautical miles with a 1NM resolution.
  Used On: Flight Planning Arrival /Departure Data Records
  Length: 3 characters
  Character Type: Numeric

  5.231 飞行里程
  定义或描述：用于飞行计划的进场/离场数据记录中，是从过渡的起始定位点至终止定位点之间，一个指定过渡的总距离。飞行计划的进场/离场数据记录的一个单一情况可以包括多至3个沿航迹距离字段，每个字段包括过渡类型的一种，其可以在主记录中构成一条单独的终端航线，并可在每个续记录中构成多至4个可能的中间定位点。总之，该值等于从第1个过渡的第1个定位点至最后过渡的最后一个定位点之间的沿航迹的距离。
  数据源或供选编码：距离由数据商使用官方的编码终端程序或未编码的终端程序计算而得，以NM表示，分辨率为1NM。
  应用范围：飞行计划进场/离场数据记录
  字节数：3位
  字符类型：数字

5.232 发动机数量限制

  5.232 Number of Engines Restriction (NOE)
  Definition/Description: The “Number of Engines Restriction” field used on Flight Planning Arrival/Departure Data Records is derived from government source and is included whenever a given procedure, normally departure, is restricted to, or designed for, aircraft with a specific number of engines.
  Source/Content: The number of engines will be taken from official government source. The field will contain the character Y for each engine configuration position, 1, 2, 3 and 4, for which the procedure is authorized. Non-authorized configuration positions will contain the character N.
  Used On: Flight Planning Arrival /Departure Data Records
  Length: 4 characters
  Character Type: Alpha
  Examples: YYYY (1, 2 3 or 4 Engine aircraft may use procedure) NNYY (3 and 4 Engine aircraft may use procedure)

  5.232 发动机数量
  定义或描述：用在飞行计划的进场/离场数据记录中，来源于官方。当规定的程序(通常为离场)限制或设计为规定发动机数量的航空器使用时，需要填写。
  数据源或供选编码：发动机数量规定来自官方。每台发动机在本项中填写一个Y，在1、2、3、4位置表示程序批准的发动机数量。无批准的发动机数以N表示。
  应用范围：应用于飞行计划的进场/离场数据记录
  字节数：4位
  字符类型：字母
  举例：YYYY(1、2、3或4发，按程序的要求填写) NNYY(3、4发，按程序要求填写)

5.233 螺旋桨/喷气指示 Turboprop/Jet Indicator

  5.233 Turboprop/Jet Indicator (TURBO)
  Definition/Description: The “Turboprop/Jet Indicator” field used on Flight Planning Arrival/Departure Data Records is derived from government source and is included whenever a given procedure, normally departure, is restricted to, or designed for, aircraft with a specific kind of engines.
  Source/Content: The indication of Turboprop, Jet or Both on the use restriction of given procedure will be taken from official government source. The field will indicate the use restriction with a character from the table below.

  Used On: Flight Planning Arrival /Departure Data Records
  Length: 1 character
  Character Type: Alpha

  5.233 螺旋桨/喷气指示
  定义或描述：用在飞行计划的进场/离场数据记录中，来源于官方。只要规定的程序(通常为离场)受到限制或设计对航空器发动机的种类有要求时要包括本项内容。
  数据源或供选编码：关于特定程序使用限制的涡轮螺旋桨、喷气发动机或两种情况的指示码资料从官方资料中摘录。本项用下表的1个字符表示。
  应用范围：本项应用于飞行计划的进场/离场数据记录
  字节数：1位
  字符类型：字母

5.234 RNAV标识 RNAV Flag(RNAV)

  5.234 RNAV Flag (RNAV)
  Definition/Description: The “RNAV Flag” field used on Flight Planning Arrival/Departure Data Records is derived from government source and is included whenever a given procedure included in the record is restricted to, or designed for, aircraft capable of flying RNAV Procedures.
  Source/Content: The indication of RNAV, Yes or No, on a given procedure will be taken from official government source. The field will indicate Y for “Yes,” the procedure is an RNAV procedure or N for “No,” the procedure is not RNAV.
  Used On: Flight Planning Arrival /Departure Data Records
  Length: 1 character
  Character Type: Alpha

  5.234 RNAV 标识
  定义或描述：用在飞行计划的进场/离场数据记录中，来源于官方。只要包含在程序记录中的规定程序限制或设计供有飞行RNAV能力的航空器使用时，要包括本字段。
  数据源或供选编码：在一个规定的程序中表示RNAV，要填写YES或NO，资料来自官方。当程序为RNAV时，填写“Y”；否则填写“N”。
  应用范围：本项应用于飞行计划的进场/离场数据记录
  字节数：1位
  字符类型：字母

5.235 管制重量分类 ATC Weight Category (ATC WC)

  5.235 ATC Weight Category (ATC WC)
  Definition/Description: The “ATC Weight Category” field used on Flight Planning Arrival/Departure Data Records is derived from government source and is included whenever a given procedure included in the record is restricted to, or designed for, a specific aircraft weight grouping.
  Source/Content: The indication of Heavy, Medium or Light aircraft on a given procedure will be taken from official government source. The field will be derived from
that source to indicate:
   H for Heavy, all aircraft types of 136,000kg (300000LB) or more.
   M for Medium, aircraft types less than 136,000kg (300,000LB) and more than 7,000kg (155,000LB).
   L for Light, aircraft types of 7,000kg (155,000LB) or less.
  Used On: Flight Planning Arrival /Departure Data Records
  Length: 1 character
  Character Type: Alpha

 5.235 管制重量分类
  定义或描述：用在飞行计划的进场/离场数据记录中，来源于官方。只要包含在程序记录中的规定程序用来限制或设计供规定重量分类航空器使用时，要包括本项。
  数据源或供选编码：在一个规定的程序中的重型、中型和轻型航空器的资料来自官方。按照官方的规定填写：
   H为重型，表示重于136,000KG(300000LB)的航空器；
   M为中型，表示7,000KG－136,000KG(300000LB)的航空器；
   L为轻型，表示轻于7,000KG(155,000LB)的航空器；
  应用范围：本项应用于飞行计划的进场/离场数据记录
  字节数：1位
  字符类型：字母

5.236 ATC名称 ATC Identifier (ATC ID)

  5.236 ATC Identifier (ATC ID)
  Definition/Description: The “ATC Identifier” field used on Flight Planning Arrival/Departure Data Records is the indication of the officially published procedure designation which is required for Flight Planning.
  Source/Content: The ATC Identifier will be derived from official government source. This seven character field is required in addition to the six character identifier, the former is used in Flight Planning, the latter in accessing the database.
  Used On: Flight Planning Arrival /Departure Data Records
  Length: 7 characters
  Character Type: Alpha/numeric

  5.236 ATC名称
  定义或描述：用在飞行计划的进场/离场数据记录中，表示飞行计划需要的官方公布的程序的代号。
  数据源或供选编码：资料来自官方，在6字符识别之外需要7字符的字段。7字符应用于飞行计划，6字符应用于数据库存取。
  应用范围：本项应用于飞行计划的进场/离场数据记录
  字节数：7位
  字符类型：字母/数字

5.237 程序描述 Procedure Description (PROC DESC)

  5.237 Procedure Description (PROC DESC)
  Definition/Description: The “Procedure Description” field used on Flight Planning Arrival/Departure Data Records is the textual representation of the procedure name.
  Source/Content: The Procedure Description will be derived from official government source. It will assist in matching flight plan content to charted procedures.
  Used On: Flight Planning Arrival /Departure Data Records
  Length: 15 characters
  Character Type: Alpha/numeric

  5.237 程序描述
  定义或描述：用在飞行计划的进场/离场数据记录中，是程序名称的文字表达。
  数据源或供选编码：程序描述来自官方，该资料有助于将飞行计划内容与图上程序相匹配。
  应用范围：本项应用于飞行计划的进场/离场数据记录
  字节数：15位
  字符类型：字母/数字

5.238 航段类型代码 Leg Type Code (LTC)

  5.238 Leg Type Code (LTC)
  Definition/Description: The “Leg Type Code” field used on Flight Planning Arrival/Departure Data Records is a simplification of the Path Terminator concept. It will provide the information on the path between intermediate waypoints as straight or curved and provide an indication of the change in direction of flight, expressed as left or right, at an intermediate waypoint.
  Source/Content: The Leg Type Code will be derived from official government source. In this two character field, the first position will indicate with the character S, straight line point to point and with the character C, curved line flight track. The second position will be used as a turn indication, L for Left and R for Right when there is a turn requirement at an intermediate waypoint.
  Used On: Flight Planning Arrival /Departure Data Records
  Length: 2 characters
  Character Type: Alpha

  5.238 航段类型代码
  定义或描述：用在飞行计划的进场/离场数据记录中，是航径终端代码概念的简化，提供中间定位点之间的航径为直线还是弯曲航段的资料，并提供飞行方向改变的说明，以表示在中间定位点左转或右转。
  数据源或供选编码：资料来自官方，在2个字段中，第1个位置填写“S”，表示点到点之间为直线；填写“C”，表示曲线飞行航迹。第2个位置应用于说明飞行方向，“L”为左，“R”为右，当在中间航路点有此要求时使用。
  应用范围：应用于飞行计划的进场/离场数据记录
  字节数：2位
  字符类型：字母

5.239 报告代码 Reporting Code (RPT)

  5.239 Reporting Code (RPT)
  Definition/Description: The “Reporting Code” field used on Flight Planning Arrival/Departure Data Records is a simplification of the Waypoint Description concept. It will provide the information on intermediate waypoints as either Position Report Required (Compulsory Report) or Position Report Not Required (On-Request Report).
  Source/Content: The Reporting Code will be derived from official government source. In this single character field, the code “C” will indicate Position Report Required and the code “X” Position Report Not Required.
  Used On: Flight Planning Arrival /Departure Data Records
  Length: 1 character
  Character Type: Alpha

  5.239 报告代码
  定义或描述：用在飞行计划的进场/离场数据记录中，是航路点描述的简化形式，提供中间航路点诸如强制位置报告或非强制位置报告(要求报告点)的资料。
  数据源或供选编码：报告代码来自官方，在1个字符的单字段中，代码“C”表示强制报告，“X”表示非强制报告。
  应用范围：本项应用于飞行计划的进场/离场数据记录
  字节数：1位
  字符类型：字母

5.240 高度 Altitude (ALT)

  5.240 Altitude (ALT)
  Definition/Description: The “Altitude” field used on Flight Planning Arrival/Departure Data Records is a simplification of the altitude concept used in the full procedure records. It will provide an altitude indication in hundreds of feet, no AGL, MSL, FL etc indication provided.
  Source/Content: The Altitude will be derived from official government source and reduced to this flight planning resolution requirement.
  Used On: Flight Planning Arrival /Departure Data Records
  Length: 3 characters
  Character Type: Numeric
  Examples:
   FL100 = 100
   10000 feet = 100
   03500 feet = 035

  5.240 高度
  定义或描述：用在飞行计划的进场/离场数据记录中，是所有程序记录中使用的高度概念的简述形式，提供以百英尺表示的高度，没有AGL MSL FL等表述。
  数据源或供选编码：资料来自官方，并简化为飞行计划需要的分辨率。
  应用范围：本项应用于飞行计划的进场/离场数据记录
  字节数：3位
  字符类型：数字
  举例：
   FL100=100
   10000ft=100
   03500ft=035

5.241 过渡相关定位点代码 Fix Related Transition Code

  5.241 Fix Related Transition Code (FRT Code)
  Definition/Description: The “Fix Related Transition Code” is used on Flight Planning Arrival/Departure Data Continuation Records containing Intermediate Fix information and provides an indication, through use of the standard coding practices of separating the procedure into transitions, as to where in the procedure the intermediate fix is located.
  Source/Content: The field will contain a code an meaning as indicated in the table below.

  Used On: Flight Planning Arrival/Departure Data Records
  Length: 1 character
  Character Type: Numeric

  5.241 过渡相关定位点代码
  定义或描述：用在飞行计划的进场/离场数据记录中，包括中间定位点的资料，并在有关程序的中间定位点所在的地方，为使用将程序与过渡分开的标准编码方法，填写一个代码。
  数据源或供选编码：填写上表中的一个代码
  应用范围：本项应用于飞行计划的进场/离场数据记录
  字节数：1位
  字符类型：数字

5.242 程序等级 Procedure Category

  5.242 Procedure Category (PROC CAT)
  Definition/Description: The Airport and Heliport SID/STAR/Approach Procedure Route Type supports the “All Sensor RNAV” Approach procedure. This kind of approach will have multiple sets of weather minimums (DH and NDA) associated with it. This field identifies the Procedure Categories for which these minimums apply.
  Source Content: The field will contain a coded category from the following table:

  Used On: Airport and Heliport SID/STAR/Approach Procedure Continuation Records
  Length: 4 characters
  Character Type: Alpha

  5.242 程序等级
  定义或描述：机场的SID/SATR/APCH程序航线类型支持“所有导航源RNAV”进近程序。这种进近类型会有多套天气最低标准(DH和MDA)与其在一起。用于说明应用这些标准的程序类型。
  数据源或供选编码：填写上表中的分类代码
  应用范围：SID/STAR/APCH程序续记录
  字节数：4
  字符类型：字母

5.243 GLS台站代码 GLS Station Identifier

  5.243 GLS Station Identifier
  Definition/Description: The “GLS Identifier” field defines the identification code for retrieval of such a transmitter from a database. This is not a transmitted identifier.
  Source/Content: The content of this field will be the Airport or Heliport ICAO Location Identifier Code at which the transmitter is installed.
  Used On: GLS Records
  Length: 4 characters max
  Character Type: Alpha/numeric

  5.243 GLS台站代码
  定义或描述：本项定义识别代码，供从数据库提取这种发射机数据之用，不是发射的识别码。
  数据源或供选编码：本内容是安装发射机的机场或直升机场ICAO地名代码。
  应用范围：GLS记录
  字节数：最多4位
  字符类型：字母/数字

5.244 GLS通道号 GLS Channel

  5.244 GLS Channel
  Definition/Description: The “GNSS Channel Number” field identifies the channel that will be decoded to identify the augmentation system used.
  Source/Content: The Channel Number is derived from official government sources. It consists of 5 numeric characters in the range 20001 to 99999 (numbers less then 20000 are reserved for ILS and MLS). Channel Numbers between 20001 and 39999 are reserved for GBAS (and SBAS if applicable) and 40000 to 99999 are reserved for SBAS.
  Used On: GLS and Path Point Continuation Records
  Length: 5 character
  Character Type: Numeric
  Examples: 20010, 56234

  5.244 GLS通道号
  定义或描述：GNSS通道号标识应用于增强系统的频道。
  数据源或供选编码：通道号资料来自官方，填写5位数字通道识别码，从20001－99999(小于20000应用于ILS和MLS)。20001-39999应用于GBAS(适用时SBAS),40000-99999应用于SBAS。
  应用范围：GLS记录、航径点续记录
  字节数：5位
  字符类型：数字
  举例： 20010，56234

5.245 服务范围半径

  5.245 Service Volume Radius
  Definition/Description: The service volume radius identifies the radius of the service volume around the transmitter in Nautical miles.
  Source/Content: The value for this field will be derived from official government sources. If no source is provided, the default value will be blanked.
  Used On: GLS Record
  Length: 2 characters
  Character Type Numeric
  Examples: 05, 19

  5.245 服务范围半径
  定义或描述：以NM为单位说明GLS发射机周围的服务圈的半径。
  数据源或供选编码：资料来自官方，如无资料，缺省值为空格。
  应用范围：GLS记录
  字节数：2位
  字符类型：数字
  举例：05，19

5.246 TDMA时间槽 TDMA Slots

  5.246 TDMA Slots
  Definition/Description: The TDMA identifies the time slot(s) in which the ground station transmits the related approach. The high precision time source available through GPS permits utilization of Time division multiplexing or TDMA (Time Division Multiple Access), allowing multiple ground stations to share a common frequency by dividing it into eight time slots. An individual station may broadcast in one or more of eight slots.
  Source/Content: The value for this field will be derived from official government sources. The range is 01 to FF. If no source is provided, the default value will be blank.
  Used On: GLS Record
  Length: 2 characters
  Character Type: Alpha/numeric Examples A2, 01, FF

  5.246 TDMA时间槽
  定义或描述：TDMA说明地面台发射的有关进近的时段。源于GPS的高精度时间，用划分8个时段的方法，允许多路时间单元或TDMA(分时多通道)的应用，可以由多个地面台占用一个通用频率。
  数据源或供选编码：资料来自官方，范围从01至FF。如无资料，缺省值为空格。
  应用范围：GLS记录
  字节数：2位
  字符类型：字母/数字
  举例：A2, 01, FF

5.247 台站类型 Station Type

  5.247 Station Type
  Definition/Description: The station type identifies the type of the differential ground station. The first character will be L for LAAS/GLS ground station, C for SCAT-1 station. The second and third character will be blank for the moment. They will indicate the interoperability standard to which the station conforms.
  Source/Content: The value for this field will be derived from official government sources. If LAAS/GLS or SCAT-1 is not specified in source, the default value will be blank.
  Used on: GLS Record
  Length: 3 characters
  Character Type: Alpha/numeric
  Examples: L, C

  5.247 台站类型
  定义或描述：用于区分地面站。第1个字符，LAAS/GLS地面站时填写“L”，SCAT-1台站填写“C”。2-3个字母暂为空，将应用于表示台站遵守的互用标准。
  数据源或供选编码：资料来自官方，如果无LAAS/GLS SCAT-I的资料，缺省值为空格。
  应用范围：GLS记录
  字节数：3位
  字符类型：字母/数字
  举例：L，C

5.248 台站标高 Station Elevation WGS84

  5.248 Station Elevation WGS84
  Description/Definition: This field identifies the WGS84 elevation of the GLS ground station described in the record.
  Source/Content: The value for this field will be derived from official government sources or entered into this field in feet with respect to the WGS84 ellipsoid. When elevation is below the WGS 84 ellipsoid, the first column of the field contains a minus (-) sign.
  Used on: GLS Record
  Length: 5 characters
  Character Type: Alpha/numeric
  Examples: 00530, -0140

  5.248 台站标高
  定义或描述：用于表明记录中描述的GLS地面台的WGS84标高。
  数据源或供选编码：资料来自官方，用英尺为单位填写相对于WGS84椭球的值。如果标高低于椭球，本项第1列填写负号“－”。
  应用范围：GLS记录
  字节数：5位
  字符类型：字母/数字
  举例：00530 ，－0140

5.249 最长跑道铺筑面代码

  5.249 Longest Runway Surface Code (LRSC)
  Definition/Description: The “Longest Runway Surface Code” field is used to define whether or not there is a hard surface runway at the airport, the length of which is indicated in the Longest Runway field.
  Source/Content: The content will be selected from the table below.

  Used On: Airport Records
  Length: 1 character
  Character Type: Alpha

  5.249 最长跑道铺筑面代码
  定义或描述：用于定义机场是否有刚性道面的跑道，其字节数在最长跑道字段中描述。
  数据源或供选编码：填写内容从上表中选择。
  应用范围：机场记录
  字节数：1位
  字符类型：字母

5.250 备降机场记录类型

  5.250 Alternate Record Type (ART)
  Definition/Description: The “Alternate Record Type” field identifiers the record as being applicable to the departure airport (take-off alternate), destination airport (arrival alternate) or a fix along the route (enroute alternate).
  Source/Content: The “Alternate Record Type” will be selected from the following table:

  Used On: Alternate Records
  Length: 2 characters
  Character Type: Alpha

  5.250 备降机场记录类型
  定义或描述：本项应用于说明备降记录应用于起飞机场(起飞备降)、目的地机场(着陆备降)还是航线的定位点(备份航路)。
  数据源或供选编码：从右表中选择：
  应用范围：备降记录
  字节数：2位
  字符类型：字母

许可协议

本文采用 署名-非商业性使用-相同方式共享 4.0 国际 许可协议，转载请注明出处。

分享文章